NORDYNROBOTICS
Home / Systems / Systems.
Portfolio

Systems.

Six product lines, one engineering standard. Everything below is designed, documented and assembled by the same team in Stockach.

Doc NRD-WEB-SYSTEMS-01
Rev A · 2026
SPAN 800 mm PAYLOAD 1.5 kg ALL DIMENSIONS NOMINAL · 1:8
UAV · Airframe

Nitro 800

Packable fixed-wing ISR platform. 800 mm wing, 1.5 kg payload, delivered in one waterproof case.

1.5 kg payload4.0 / 8.0 kg MTOW> 50 km link
SPAN 1,000 mm PAYLOAD 2.5 kg ALL DIMENSIONS NOMINAL · 1:8
UAV · Airframe

Nitro 1000

The larger airframe. 2.5 kg payload and a 1000 mm wing without leaving the one-case logistics.

2.5 kg payload5.0 / 9.0 kg MTOW3,500 m ceiling
H 45 mm 140 mm PACK ENVELOPE · 6S2P XT90 DISCHARGE · 5.5 mm DC CHARGE
Energy · Battery

Nordyn Power

Molicel P45B based packs with integrated heating and Battery iQ. Three configurations for three mission profiles.

6S2P / 6S3P / 8S3P90–135 A continuous−30 °C operation
CASE LENGTH CASE DEPTH 15" OPTICALLY BONDED SUNLIGHT-READABLE GCS · DEPLOYED CONFIGURATION RUGGED TRANSIT CASE / INTEGRATED COMPUTE
Ground · Control

Ground Control Station

Display, computer and keyboard integrated into a rugged transit case that one person can carry.

15" bonded displayIntegrated computeDeploys in minutes
Ø 90 mm BELL STATOR SECTION A–A · OUTRUNNER 12N14P · N52H ARC MAGNETS
Propulsion · Motors

ADM Series 9 / Series 4

Outrunner motors for multirotor and fixed-wing platforms, with a traceable supply chain.

48 V class680 KV / 5.42 kg thrustNDAA-ready
20 FT · 6.06 m 01 PRINT 02 MILL 03 ELECTRONICS 04 FINISH 05 ASSEMBLY PRODUCTION CELL · ELEVATION NRD-MF-20-ELEV
Production · Cell

Micro-factory

A standard 20-ft container fitted as a complete production cell for the Nitro airframes.

Print · mill · electronics5 stationsProduces on arrival
Integration

Buy an aircraft,
or the means to build it.

Customers arrive with very different constraints. Some need flying systems next month. Others need the ability to manufacture without an export licence in the loop. We sell both, and we will tell you which one solves your problem.

  • 01
    Platform supplyAirframes, packs, motors and ground stations delivered as configured units, with documentation.
  • 02
    Licensed productionA production cell, the process documentation and the training to run it on your own site.
  • 03
    Engineering supportPayload integration, battery configuration and airworthiness documentation support.
Common interfacesAcross the range
Table 2 — Shared specification
Battery dischargeXT90 standard
Battery charge5.5 mm DC socket
Pack managementBattery iQ · 3 modes
DocumentationConfiguration data per unit
ComplianceNDAA Section 889
OriginGermany
For procurement

Documented per unit

Every delivered system carries its configuration data: cell basis, firmware state, test record, component provenance.

For operators

One case, one person

Airframe, batteries and ground station designed around field logistics rather than warehouse logistics.

For partners

Local production

Run the cell yourself and manufacture on sovereign soil, with our process documentation and training.

Next step

Which configuration fits your programme?

Send us the mission profile and the country of use. We will come back with a configuration, a delivery path and the compliance picture.

Request a briefing About Nordyn